How to fix samples that won't spray
We prime all products during production, but sometimes during transit the atomiser may get blocked with an air bubble and you may find it doesn't spray. If this happens to your samples, the solution is simple: firmly depress the pump all the way to the bottom, then let it spring back. Do this action quickly, but leave time in between for the pump to rebound. It usually primes in 4-5 pumps, but you may need up to 10 pumps to get your working.
Note: if you depress the atomiser too slowly you will cause the product to dribble out. Depressing too quickly and not allowing time in between pumps will not allow air to get inside the actuator, and won't draw the liquid into the tube.